dForce Scarlett Cocktail Dress for Genesis 8 Females


dforce-scarlett-cocktail-dress-for-genesis-8-females

*********
*Product: dForce Scarlett Cocktail Dress for Genesis 8 Female
*Copyright: by Sparkman
*Contact: via site mail at Renderhub
*********

This product is represented by two piece of clothing – dForce Scarlett Dress for G8F and dForce Neckerchief (props) for G8F plus
3 Wearables preset for G8F: Dress as props ,free fall on the floor (must unfit from G8F) ,Scarlett Dress + Left and Right SIDE Dress UP HELPER,!! Wearable Scarlett Cocktail Dress (dress + Neckerchief) and complemented by 13 undressing
poses for Genesis 8 Female and high quality morphes for Scarlett Dress . As well as 76 IRAY materials for Scarlett Dress and Neckerchief ,multiple transparency levels and other parameter for clothes , props and DressUP helper.
Thank you for purchasing and supporting my product. Good luck with the rendering !

Try Bluehost its fast

—-
Compatible Products / Software:
—-

This clothing set was created for:
Genesis 8 Female by Daz3D

Supported Genesis 8 Female figures:
Aiko 8
Karyssa 8
Mika 8
Sakura 8
Alexandra 8
Bridget 8
Charlotte 8
Gia 8
MeiLin 8
Monique 8
Olympia 8
Penny 8
Stephanie 8
Teen Josie 8
Teen Jane 8
Teen Raven 8
Tika 8
Victoria 8
Zelara 8
Sydney 8
Kala 8
Ellithia 8
Kanade 8
Gabriela 8
Babina 8
Leisa 8
Robyn 8
Darcy 8
CJ 8
Heavy
Voluptions
and moreβ€₯
+ several Genesis 8 Female bodyshapes

This clothing set works in:
DAZ Studio 4.12 (dForce support)
—–
Set of clothes dForce Scarlett Cocktail Dress for Genesis 8 Female consists of 2 pieces:

1. dForce Scarlett Cocktail Dress for G8F.
2. dForce Neckerchief for G8F.(prop)
+ 3 Wearables Presets for G8:
Dress as props ,free fall on the floor (must unfit from G8F)
Scarlett Dress + Left and Right SIDE Dress UP HELPER
!! Wearable Scarlett Cocktail Dress (dress + Neckerchief)

There are 13 undress poses for Genesis 8 Female + 11 other poses, available for selection in the subfolder “Poses”
in the product folder “dForce Scarlett Dress” Content library TABs and 41 dynamic clothes morphs
for dForce Scarlett Dress , available for selection in section morphs in the parameters tab.

All poses are numbered and contain titles , morphs for clothers well contain names and numbers. Put in the scene your character G8F
and put on her “!! Wearable Scarlett Cocktail Dress” from the product folder, in a subfolder named “poses” apply the pose to G8F and activate the morph with the number corresponding to the number of the selected pose. In the materials subfolder,
select your favorite colors for Scarlett Dress and Neckerchief . To use dForce simulations, you only need to install G8F in the desired position and enable the simulation , all the materials presented in the product are configured to use DAZ dforce.

Nice render!

—-
Product requirements:
—–
Genesis 8 Female, and/or G8 Female
character and shape morphs.
—–

—–

dForce Scarlett Cocktail Dress for Genesis 8 Female working only in Daz dForce simulate.
—-
Other Information
—-

This product was tested in DAZ Studio 4.12 on a PC.
This product was not tested on a MAC system.

If you should have any problems to get this package working correctly,
please feel free to contact us through Renderhub Sitemail.

—–
What you get with this package:
—–

01 Geometry files (.duf):

01 Weightmapped dForce Scarlett Dress with Morphs (.duf)
02 dForce Neckerchief (prop)
+ 3 Wearables Presets for G8:
Dress as props ,free fall on the floor (must unfit from G8F)
Scarlett Dress + Left and Right SIDE Dress UP HELPER
!! Wearable Scarlett Cocktail Dress (dress + Neckerchief)

55 Iray Material presets for Cocktail Dress + 8 Transparent level presets
21 Iray Material presets for Neckerchief + 4 Transparent level and shine presets

All IRAY material presets for “Scarlett Dress” and “Neckerchief” are customized for standard simulation .

TEXTURES

112 complete high resolution texture/bumpmaps/displacement/normal map (4096×4096) for Scarlett Dress and Neckerchief (.jpg)

—-
Ownership Statement
—-

All of this product’s content was created by Sparkman.
All of the models, meshes, custom morphs and textures in this package are protected by
international copyright laws.
All logos on clothing designed by Sparkman and don’t repeat the originals sportswear brands.
You may use any of the contents of this package in commercial or non commercial renders
(promotions, artistic images, etc.), however, none of the elements in this package may be
shared, redistributed, copied, edited, or altered in any way for the creation of other products.


Installation & Usage Instructions:

To make sure all content gets installed properly, unzip the files directly to your DAZ Studio library,

For example: “DAZ Studio 4.12/My Library” or “DAZ Studio 4.10/Content”

01 Load Genesis 8 Female.
02 Go to People -> Genesis 8 Female -> Clothing -> Sparkman -> “dForce Scarlett Dress”
03 Load the clothing by double-clicking on the icons “!! Wearable Scarlett Cocktail Dress”
04 Material Presets are located in “Materials” subfolders in produkt folders.
When applying, please make sure the correct figures are selected.

DAZ dForce: This product is completely ready to use dForce simulation, go to the “Simulation settings” tab and click ” Simulate”

05 There are 13 undress poses +11 other poses for Genesis 8 Female , available for selection in the subfolder “Poses”
in the product folder “dForce Scarlett Dress” Content library TABs and 41 dynamic clothes morphs for dForce Scarlett Dress .

Some clothing can be used as props , previously it must be disconnected from the G8F (Fit to: NONE)

1. Load the “Dress as props ,free fall on the floor (must unfit from G8F)”
2. Load simulation plane.(not included in this clothing set)
3. start the simulation process, after the simulation set the desired color to “Scarlett Dress” or “Neckerchief” by selecting

material in the product library and start the rendering process .

BONUS!! “Scarlett Dress + Left and Right SIDE Dress UP HELPER” Step by step instruction with pictures for using “Scarlett Dress + Left and Right SIDE Dress UP HELPER” is on the promo picture of the product.

“Scarlett Dress + Left and Right SIDE Dress UP HELPER” is used only when you intend to use the helper for its intended purpose,
then the simulation will be of high quality ,if you do not intend to use the helper is recommended to use the basic model
“!! Wearable Scarlett Cocktail Dress” , which eliminates the marriage in the simulation work.

—-

*********
*Product: dForce Scarlett Cocktail Dress for Genesis 8 Female
*Copyright: by Sparkman
*Contact: via site mail at Renderhub
*********

This product is represented by two piece of clothing – dForce Scarlett Dress for G8F and dForce Neckerchief (props) for G8F plus
3 Wearables preset for G8F: Dress as props ,free fall on the floor (must unfit from G8F) ,Scarlett Dress + Left and Right SIDE Dress UP HELPER,!! Wearable Scarlett Cocktail Dress (dress + Neckerchief) and complemented by 13 undressing
poses for Genesis 8 Female and high quality morphes for Scarlett Dress . As well as 76 IRAY materials for Scarlett Dress and Neckerchief ,multiple transparency levels and other parameter for clothes , props and DressUP helper.
Thank you for purchasing and supporting my product. Good luck with the rendering !

—-
Compatible Products / Software:
—-

This clothing set was created for:
Genesis 8 Female by Daz3D

Supported Genesis 8 Female figures:
Aiko 8
Karyssa 8
Mika 8
Sakura 8
Alexandra 8
Bridget 8
Charlotte 8
Gia 8
MeiLin 8
Monique 8
Olympia 8
Penny 8
Stephanie 8
Teen Josie 8
Teen Jane 8
Teen Raven 8
Tika 8
Victoria 8
Zelara 8
Sydney 8
Kala 8
Ellithia 8
Kanade 8
Gabriela 8
Babina 8
Leisa 8
Robyn 8
Darcy 8
CJ 8
Heavy
Voluptions
and moreβ€₯
+ several Genesis 8 Female bodyshapes

This clothing set works in:
DAZ Studio 4.12 (dForce support)
—–
Set of clothes dForce Scarlett Cocktail Dress for Genesis 8 Female consists of 2 pieces:

1. dForce Scarlett Cocktail Dress for G8F.
2. dForce Neckerchief for G8F.(prop)
+ 3 Wearables Presets for G8:
Dress as props ,free fall on the floor (must unfit from G8F)
Scarlett Dress + Left and Right SIDE Dress UP HELPER
!! Wearable Scarlett Cocktail Dress (dress + Neckerchief)

There are 13 undress poses for Genesis 8 Female + 11 other poses, available for selection in the subfolder “Poses”
in the product folder “dForce Scarlett Dress” Content library TABs and 41 dynamic clothes morphs
for dForce Scarlett Dress , available for selection in section morphs in the parameters tab.

All poses are numbered and contain titles , morphs for clothers well contain names and numbers. Put in the scene your character G8F
and put on her “!! Wearable Scarlett Cocktail Dress” from the product folder, in a subfolder named “poses” apply the pose to G8F and activate the morph with the number corresponding to the number of the selected pose. In the materials subfolder,
select your favorite colors for Scarlett Dress and Neckerchief . To use dForce simulations, you only need to install G8F in the desired position and enable the simulation , all the materials presented in the product are configured to use DAZ dforce.

Nice render!

—-
Product requirements:
—–
Genesis 8 Female, and/or G8 Female
character and shape morphs.
—–

—–

dForce Scarlett Cocktail Dress for Genesis 8 Female working only in Daz dForce simulate.
—-
Other Information
—-

This product was tested in DAZ Studio 4.12 on a PC.
This product was not tested on a MAC system.

If you should have any problems to get this package working correctly,
please feel free to contact us through Renderhub Sitemail.

—–
What you get with this package:
—–

01 Geometry files (.duf):

01 Weightmapped dForce Scarlett Dress with Morphs (.duf)
02 dForce Neckerchief (prop)
+ 3 Wearables Presets for G8:
Dress as props ,free fall on the floor (must unfit from G8F)
Scarlett Dress + Left and Right SIDE Dress UP HELPER
!! Wearable Scarlett Cocktail Dress (dress + Neckerchief)

55 Iray Material presets for Cocktail Dress + 8 Transparent level presets
21 Iray Material presets for Neckerchief + 4 Transparent level and shine presets

All IRAY material presets for “Scarlett Dress” and “Neckerchief” are customized for standard simulation .

TEXTURES

112 complete high resolution texture/bumpmaps/displacement/normal map (4096×4096) for Scarlett Dress and Neckerchief (.jpg)

—-
Ownership Statement
—-

All of this product’s content was created by Sparkman.
All of the models, meshes, custom morphs and textures in this package are protected by
international copyright laws.
All logos on clothing designed by Sparkman and don’t repeat the originals sportswear brands.
You may use any of the contents of this package in commercial or non commercial renders
(promotions, artistic images, etc.), however, none of the elements in this package may be
shared, redistributed, copied, edited, or altered in any way for the creation of other products.


Installation & Usage Instructions:

To make sure all content gets installed properly, unzip the files directly to your DAZ Studio library,

For example: “DAZ Studio 4.12/My Library” or “DAZ Studio 4.10/Content”

01 Load Genesis 8 Female.
02 Go to People -> Genesis 8 Female -> Clothing -> Sparkman -> “dForce Scarlett Dress”
03 Load the clothing by double-clicking on the icons “!! Wearable Scarlett Cocktail Dress”
04 Material Presets are located in “Materials” subfolders in produkt folders.
When applying, please make sure the correct figures are selected.

DAZ dForce: This product is completely ready to use dForce simulation, go to the “Simulation settings” tab and click ” Simulate”

05 There are 13 undress poses +11 other poses for Genesis 8 Female , available for selection in the subfolder “Poses”
in the product folder “dForce Scarlett Dress” Content library TABs and 41 dynamic clothes morphs for dForce Scarlett Dress .

Some clothing can be used as props , previously it must be disconnected from the G8F (Fit to: NONE)

1. Load the “Dress as props ,free fall on the floor (must unfit from G8F)”
2. Load simulation plane.(not included in this clothing set)
3. start the simulation process, after the simulation set the desired color to “Scarlett Dress” or “Neckerchief” by selecting

material in the product library and start the rendering process .

BONUS!! “Scarlett Dress + Left and Right SIDE Dress UP HELPER” Step by step instruction with pictures for using “Scarlett Dress + Left and Right SIDE Dress UP HELPER” is on the promo picture of the product.

“Scarlett Dress + Left and Right SIDE Dress UP HELPER” is used only when you intend to use the helper for its intended purpose,
then the simulation will be of high quality ,if you do not intend to use the helper is recommended to use the basic model
“!! Wearable Scarlett Cocktail Dress” , which eliminates the marriage in the simulation work.

—-

RenderHub
RenderHub
3D Models
3D Models
https://www.renderhub.com/sparkman/dforce-scarlett-cocktail-dress-for-genesis-8-females
https://www.renderhub.com/sparkman/dforce-scarlett-cocktail-dress-for-genesis-8-females

 

 

Recent Posts